NSN 5305-01-396-5233
High Torque Screw
Between 0.973 inches and 1.003 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number AIC618-3-10 for national stock number 5305013965233.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-396-5233.
-
MPN or Model
AIC618-3-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
095190 - Hardware, NOI Sub 9 -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 0.973 inches and 1.003 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
0.625 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-008-5912 MPN IC551C-06-279Shoulder Screw
- 5305-00-186-9221 MPN AIC82-4-30Close Tolerance Screw
- 5305-00-809-1739 MPN 51B333-14HMachine Screw
- 5305-01-004-9497 MPN AIC813-06R16Machine Screw
- 5305-01-131-2209 MPN HT4025L6-16Close Tolerance Screw
- 5305-01-135-1149 MPN ST3M455-5L5-1Close Tolerance Screw
- 5305-01-312-0242 MPN BACB30MS4S15Close Tolerance Screw
- 5305-01-408-5305 MPN AIC1198-04-5Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-396-5233 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC618-3-10 | Sps Technologies, Llc |
93926-3-10 | Sps Technologies, Llc |
93926-3-10 | Sps Technologies, Llc |
C20645-3-10 | Lockheed Martin Corporation |
GS1009-3-10 | B & B Specialties Inc. |