NSN 5305-01-396-8067
High Torque Screw
Between 0.922 inches and 0.952 inches fastener length, flat countersunk head style, between 0.296 inches and 0.301 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number HT4041-3-10-5 for national stock number 5305013968067.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-396-8067.
-
MPN or Model
HT4041-3-10-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.312 inches -
Fastener Length
Between 0.922 inches and 0.952 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.296 inches and 0.301 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-082-1897 MPN 3MFR509-10R9Machine Screw
- 5305-00-929-4069 MPN VT1040-3-3Machine Screw
- 5305-01-046-3963 MPN HT4011-5-16Shoulder Screw
- 5305-01-076-4946 MPN SC1810-4-4Close Tolerance Screw
- 5305-01-104-1468 MPN HT4067-3-5Close Tolerance Screw
- 5305-01-142-4873 MPN HT4008-5-9Shoulder Screw
- 5305-01-142-8408 MPN HT4020-4-13AYShoulder Screw
- 5305-01-164-7473 MPN HT8137-5-22ASClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-396-8067 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4041-3-10-5 | Huck International, Inc. |
HT4041-3-10-5 | Arconic Global Fasteners & Rings, |
HT4041-3-10-5 | Hi-shear Corporation |
HT4041-3-10-5 | Lisi Aerospace Canada Corp |
HT4041-3-10-5 | Sps Technologies, Llc |
HT4041-3-10-5 | Huck Intl Inc |
HT4041-3-10-5 | Alcoa Global Fasteners, Inc. |