NSN 5305-01-397-3445
High Torque Screw
1.203 inches fastener length, pan no. 2 head style, between 0.385 inches and 0.395 inches head diameter, head height: between 0.172 inches and 0.187 inches .
Manufacturer part number GB511GK4-11 for national stock number 5305013973445.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-397-3445.
-
MPN or Model
GB511GK4-11
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.516 inches -
Fastener Length
1.203 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.385 inches and 0.395 inches -
Head Height
Between 0.172 inches and 0.187 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.250 inches -
Grip Length
Between 0.677 inches and 0.697 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5950-00-007-5994 MPN 128SEAV19036-17Power Transformer
- 1560-00-008-3623 MPN A51P20543-1Engine Fe Fuel Coupling Assembly
- 5935-00-048-5812 MPN GA800PC14-30Electrical Connector Backshell
- 5935-00-059-1388 MPN GC15A4P28-15SElectrical Plug Connector
- 1560-00-075-0708 MPN 128CM13016-1Follower Assembly
- 1560-00-122-6863 MPN 128PM10110-11Bleed Fitting
- 1560-00-135-4972 MPN 128ECP11608-11Duct Assembly
- 1560-00-165-4883 MPN 86014Balance And Seal Assembly
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-397-3445 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
GB511GK4-11 | Northrop Grumman Systems Corporation |
PBF1510-4-11 | Sps Technologies, Llc |