NSN 5305-01-399-3794
High Torque Screw
Between 1.048 inches and 1.078 inches fastener length, flat countersunk head style, 0.6335 inches head diameter, grip diameter: between 0.3427 inches and 0.3432 inches .
Manufacturer part number NAS1580C5T9Y for national stock number 5305013993794.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-399-3794.
-
MPN or Model
NAS1580C5T9Y
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.501 inches -
Fastener Length
Between 1.048 inches and 1.078 inches -
Head Style
Flat countersunk -
Head Diameter
0.6335 inches -
Grip Diameter
Between 0.3427 inches and 0.3432 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.3125 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5732 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-384-3987 MPN NAS1063A2TB107ADTerminal Board Marker Strip
- 5305-00-008-9055 MPN NAS1298-5-18Shoulder Screw
- 5305-00-054-5651 MPN MS51957-17Machine Screw
- 5305-00-054-9245 MPN MS24694C106Machine Screw
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
- 5305-00-086-2457 MPN NAS1203-25Close Tolerance Screw
- 5305-00-150-9675 MPN MS35190-323Machine Screw
- 5305-00-207-1765 MPN NAS220DD11Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-399-3794 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580C5T9Y | National Aerospace Standards |