NSN 5305-01-400-1006
High Torque Screw
Between 2.204 inches and 2.240 inches fastener length, flat countersunk head style, 0.7676 inches head diameter, grip diameter: between 0.4325 inches and 0.4365 inches .
Manufacturer part number NAS517-7-24 for national stock number 5305014001006.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-400-1006.
-
MPN or Model
NAS517-7-24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.689 inches and 0.755 inches -
Fastener Length
Between 2.204 inches and 2.240 inches -
Head Style
Flat countersunk -
Head Diameter
0.7676 inches -
Grip Diameter
Between 0.4325 inches and 0.4365 inches -
Internal Drive Style
Cross recess type ii -
Thread Diameter
0.4375 inches -
Grip Length
Between 1.485 inches and 1.515 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4340 and steel comp 8740 -
Material Specification
Mil-s-6758 military specification single material response and mil-s-6049 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty ii, cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas517 professional/industrial association standard
More from these suppliers
- 5935-01-323-4641 MPN MS33687-24-28PElectrical Connector Insert
- 5305-00-008-5892 MPN NAS1102C08-30Machine Screw
- 5305-00-044-4153 MPN MS90725-109Hexagon Head Cap Screw
- 5305-00-052-9971 MPN MS51862-26Tapping Screw
- 5305-00-071-1781 MPN MS90725-128Hexagon Head Cap Screw
- 5305-00-081-2651 MPN MS51038-15Setscrew
- 5305-00-138-9915 MPN MS51105-366Hexagon Head Cap Screw
- 5305-00-143-9574 MPN NAS1101-08H22Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-400-1006 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS517-7-24 | National Aerospace Standards |
NAS517-7-24 | National Aerospace Standards |
NAS517-7-24 | National Aerospace Standards |
NAS517-7-24 | National Aerospace Standards |
NAS517-7-24 | National Aerospace Standards |
NAS517-7-24 | National Aerospace Standards |
NAS517-7-24 | National Aerospace Standards |
NAS517-7-24 | National Aerospace Standards |
NAS517-7-24 | National Aerospace Standards |
NAS517-7-24 | National Aerospace Standards |
NAS517-7-24 | National Aerospace Standards |
NAS517-7-24 | National Aerospace Standards |
NAS517-7-24 | National Aerospace Standards |