NSN 5305-01-401-3702
Panel Screw
Between 0.969 inches and 1.000 inches fastener length, pan head style, between 0.256 inches and 0.270 inches head diameter, head height: between 0.087 inches and 0.097 inches .
Manufacturer part number S235A163-21 for national stock number 5305014013702.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-401-3702.
-
MPN or Model
S235A163-21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.075 inches and 0.105 inches -
Fastener Length
Between 0.969 inches and 1.000 inches -
Head Style
Pan -
Head Diameter
Between 0.256 inches and 0.270 inches -
Head Height
Between 0.087 inches and 0.097 inches -
First Diameter From Head
Between 0.085 inches and 0.095 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
0.625 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
32 -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 -
Material Specification
Fed 66 federal standard all material responses -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5905-01-533-1643 MPN T5905-0019-070Film Fixed Chip Resistor
- 5935-01-540-3633 MPN T5935-0181-001Plug-in Electronic Components Socket Adapter
- 5935-01-406-5912 MPN C235A407-4Electrical Receptacle Connector
- 5950-01-411-6184 MPN T235A440-1Power Transformer
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-401-3702 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S235A163-21 | Telephonics Corporation |