NSN 5305-01-401-5412
High Torque Screw
Between 0.848 inches and 0.878 inches fastener length, flat countersunk head style, 0.456 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number NAS7204U7 for national stock number 5305014015412.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-401-5412.
-
MPN or Model
NAS7204U7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 0.848 inches and 0.878 inches -
Head Style
Flat countersunk -
Head Diameter
0.456 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5737 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas7204 professional/industrial association standard
More from these suppliers
- 5940-01-470-3345 MPN NAS1063A6-510BLTerminal Board Marker Strip
- 5940-01-381-7077 MPN NAS1063B180-191Terminal Board Marker Strip
- 5935-00-111-1891 MPN NAS1665-14Electrical Connector Backshell
- 5305-00-008-5892 MPN NAS1102E08-30Machine Screw
- 5305-00-107-1991 MPN NAS1189-04P6Socket Head Cap Screw
- 5305-00-147-8053 MPN NAS1352C08LL10Socket Head Cap Screw
- 5305-00-243-7157 MPN MS16995-51BSocket Head Cap Screw
- 5305-00-269-2802 MPN MS90726-59Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-401-5412 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7204U7 | National Aerospace Standards |