NSN 5305-01-406-3368
Panel Screw
0.500 inches fastener length, flat countersunk undercut head style, between 0.256 inches and 0.270 inches head diameter, head height: 0.075 inches .
Manufacturer part number S235A163-104 for national stock number 5305014063368.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-406-3368.
-
MPN or Model
S235A163-104
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.187 inches -
Fastener Length
0.500 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.256 inches and 0.270 inches -
Head Height
0.075 inches -
Point Style
Cone -
Internal Drive Style
W/o internal drive -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 -
Material Specification
Fed standard no 66 federal specification single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Mil-s-5002 military specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5940-01-401-5338 MPN C235A428-2Lug Terminal
- 5985-01-441-2280 MPN 684-1500-001Waveguide Adapter
- 1680-01-491-9802 MPN 680-4012-001Electrical-electronic Equipment Control Panel
- 5935-01-406-5409 MPN C235A255-512Electrical Receptacle Connector
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-406-3368 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S235A163-104 | Telephonics Corporation |
S235A163-104 | Telephonics Corporation |
S235A163-104 | Telephonics Corporation |
S235A163-104 | Telephonics Corporation |
S235A163-104 | Telephonics Corporation |
S235A163-104 | Telephonics Corporation |
S235A163-104 | Telephonics Corporation |
S235A163-104 | Telephonics Corporation |
S235A163-104 | Telephonics Corporation |
S235A163-104 | Telephonics Corporation |
S235A163-104 | Telephonics Corporation |
S235A163-104 | Telephonics Corporation |
S235A163-104 | Telephonics Corporation |
S235A163-104 | Telephonics Corporation |