NSN 5305-01-406-6950
High Torque Screw
1.175 inches fastener length, flat countersunk head style, 0.449 inches head diameter, grip diameter: between 0.2641 inches and 0.2651 inches .
Manufacturer part number NAS1974-12TX for national stock number 5305014066950.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-406-6950.
-
MPN or Model
NAS1974-12TX
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
1.175 inches -
Head Style
Flat countersunk -
Head Diameter
0.449 inches -
Grip Diameter
Between 0.2641 inches and 0.2651 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.2500 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-425-7401 MPN NAS1063C8-307Terminal Board Marker Strip
- 5940-01-455-2466 MPN NAS1063A20-500BATerminal Board Marker Strip
- 5935-00-111-1890 MPN NAS1665-10Electrical Connector Backshell
- 5305-00-043-2682 MPN MS24694-S98Machine Screw
- 5305-00-060-7667 MPN NAS1153-2Close Tolerance Screw
- 5305-00-069-5575 MPN MS90725-88Hexagon Head Cap Screw
- 5305-00-082-1653 MPN NAS1352-202Socket Head Cap Screw
- 5305-00-121-2342 MPN MS27039C1-29Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-406-6950 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1974-12TX | National Aerospace Standards |
NAS1974-12TX | National Aerospace Standards |