NSN 5305-01-406-8671
High Torque Screw
Between 1.048 inches and 1.078 inches fastener length, dished hexagon head style, between 0.156 inches and 0.171 inches head height, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS6205-10Y for national stock number 5305014068671.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-406-8671.
-
MPN or Model
NAS6205-10Y
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.413 inches and 0.463 inches -
Fastener Length
Between 1.048 inches and 1.078 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel comp e4340 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf -
Specification Data
80205-nas6205-10y professional/industrial association standard
More from these suppliers
- 5940-01-391-5970 MPN NAS1063A9-TB141CTerminal Board Marker Strip
- 5940-01-633-7510 MPN M81824/6-2Conductor Splice
- 5305-00-008-3672 MPN NAS1100E08-24Machine Screw
- 5305-00-052-9956 MPN MS24619-14Tapping Screw
- 5305-00-069-0301 MPN NAS1352C04-6Socket Head Cap Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
- 5305-00-107-2003 MPN NASM24693 P/N C249Machine Screw
- 5305-00-159-5554 MPN NAS1101E08-8Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-406-8671 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6205-10Y | National Aerospace Standards |