NSN 5305-01-407-2010
High Torque Screw
Between 0.534 inches and 0.564 inches fastener length, flat countersunk head style, 0.339 inches head diameter, grip diameter: between 0.2041 inches and 0.2051 inches .
Manufacturer part number NAS1580A3T3Y for national stock number 5305014072010.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-407-2010.
-
MPN or Model
NAS1580A3T3Y
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 0.534 inches and 0.564 inches -
Head Style
Flat countersunk -
Head Diameter
0.339 inches -
Grip Diameter
Between 0.2041 inches and 0.2051 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.177 inches and 0.197 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
100.0 degrees -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-754-8636 MPN NAS706S3Feedthru Terminal
- 5935-01-067-0916 MPN NAS1599REVDElectrical Plug Connector
- 5305-00-005-0629 MPN NAS1190E04P6Socket Head Cap Screw
- 5305-00-007-9881 MPN NAS1100E04-7PMachine Screw
- 5305-00-058-0506 MPN NAS1352-08H6PSocket Head Cap Screw
- 5305-00-059-3666 MPN MS51958-70Machine Screw
- 5305-00-071-2530 MPN MS24678-43Socket Head Cap Screw
- 5305-00-121-2412 MPN NAS1635-04-11Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-407-2010 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A3T3Y | National Aerospace Standards |