NSN 5305-01-410-8270
High Torque Screw
Between 1.131 inches and 1.181 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number 3M1165-3-12F for national stock number 5305014108270.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-410-8270.
-
MPN or Model
3M1165-3-12F
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.381 inches and 0.431 inches -
Fastener Length
Between 1.131 inches and 1.181 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
0.750 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Stainless steel -
Surface Treatment
Aluminum and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-571-8180 MPN 3M1315-501 Aircraft Index Pin
- 5305-01-203-6447 MPN 3M927-4L6Close Tolerance Screw
- 5305-01-494-3343 MPN 11827C5-17AClose Tolerance Screw
- 5305-01-512-8364 MPN 11825C4-18AClose Tolerance Screw
- 5305-01-513-8623 MPN 11853D6D15-6AClose Tolerance Screw
- 5306-01-289-9445 MPN 11697A05U014Close Tolerance Bolt
- 5306-01-541-5136 MPN 11833E4D13Close Tolerance Bolt
- 5320-01-091-4603 MPN TL130-4-31Pin-rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-410-8270 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M1165-3-12F | Boeing Company, The |
11843-3-12F | Reid Products Inc. |
3M1165-3-12F | Boeing Company, The |
11843-3-12F | Reid Products Inc. |
3M1165-3-12F | Boeing Company, The |
11843-3-12F | Reid Products Inc. |
3M1165-3-12F | Boeing Company, The |
11843-3-12F | Reid Products Inc. |