NSN 5305-01-412-0842
High Torque Screw
Between 0.877 inches and 0.907 inches fastener length, flat countersunk head style, 0.510 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number NAS8706-7 for national stock number 5305014120842.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-412-0842.
-
MPN or Model
NAS8706-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.454 inches -
Fastener Length
Between 0.877 inches and 0.907 inches -
Head Style
Flat countersunk -
Head Diameter
0.510 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.375 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf -
Specification Data
80205-nas8706 professional/industrial association standard
More from these suppliers
- 5935-00-471-9923 MPN NAS1650R22B41PNElectrical Receptacle Connector
- 5940-01-446-4551 MPN NAS1063A13-125Terminal Board Marker Strip
- 5305-00-006-8306 MPN NAS1100E06-4PMachine Screw
- 5305-00-014-4723 MPN MS51861-14Tapping Screw
- 5305-00-023-5867 MPN NAS602-2Machine Screw
- 5305-00-052-6456 MPN MS16996-10Socket Head Cap Screw
- 5305-00-057-0526 MPN MS51958-30Machine Screw
- 5305-00-057-3663 MPN NAS1352-6LE12PSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-412-0842 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS8706-7 | National Aerospace Standards |
NAS8706-7 | National Aerospace Standards |
NAS8706-7 | National Aerospace Standards |
NAS8706-7 | National Aerospace Standards |
NAS8706-7 | National Aerospace Standards |
NAS8706-7 | National Aerospace Standards |
NAS8706-7 | National Aerospace Standards |
NAS8706-7 | National Aerospace Standards |
NAS8706-7 | National Aerospace Standards |