NSN 5305-01-412-5359
High Torque Screw
Oversize grip dia.
Manufacturer part number LD111-0045-0712 for national stock number 5305014125359.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-412-5359.
-
MPN or Model
LD111-0045-0712
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.599 inches -
Fastener Length
Between 1.646 inches and 1.676 inches -
Head Style
Flat countersunk -
Head Diameter
0.826 inches -
Grip Diameter
Between 0.4521 inches and 0.4526 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.437 inches -
Grip Length
0.750 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-858-9361 MPN 265-321335-72Nacelle Door Latch
- 5935-01-166-0049 MPN LE482-0032-0801Electrical Connector Backshell
- 5930-01-170-2140 MPN LE452-0002-2A01Toggle Switch
- 1560-01-174-0751 MPN L3300313-005Aircraft Structural Component Support
- 4820-01-182-9738 MPN L5840486-001Calibrated Flow Valve
- 5935-01-192-0072 MPN LE482-0033-1002Electrical Connector Backshell
- 4920-01-196-4327 MPN 0003-85-0002Aircraft Maintenance Fixture
- 1680-01-203-7003 MPN L3400129-001Downlock Fitting
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-412-5359 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0045-0712 | Boeing Company, The |