NSN 5305-01-412-5361
High Torque Screw
Between 1.384 inches and 1.414 inches fastener length, flat countersunk head style, 0.951 inches head diameter, grip diameter: between 0.4990 inches and 0.4995 inches .
Manufacturer part number LD111-0044-0812 for national stock number 5305014125361.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-412-5361.
-
MPN or Model
LD111-0044-0812
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.649 inches -
Fastener Length
Between 1.384 inches and 1.414 inches -
Head Style
Flat countersunk -
Head Diameter
0.951 inches -
Grip Diameter
Between 0.4990 inches and 0.4995 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.500 inches -
Grip Length
0.750 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5873 MPN BACB30LU4D17Machine Screw
- 5305-00-680-5889 MPN BACB30LU-4D-35Machine Screw
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-01-207-9339 MPN BACS12CK3U10Machine Screw
- 5305-01-435-5528 MPN BACB30LU8-23Close Tolerance Screw
- 5305-01-435-8284 MPN BACB30LU9-40Close Tolerance Screw
- 5305-01-465-2425 MPN 3M1169D4-10AFClose Tolerance Screw
- 5306-00-084-0610 MPN VAL22034-8F18Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-412-5361 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-0812 | Boeing Company, The |
LD111-0044-0812 | Sps Technologies, Llc |
LD111-0044-0812 | Valley-todeco, Inc. |
LD111-0044-0812 | Level One Fasteners |
LD111-0044-0812 | Sps Technologies, Llc |
LD111-0044-0812 | Sps Technologies, Llc |
LD111-0044-0812 | Sonic Industries Inc. |
LD111-0044-0812 | Hi-shear Corporation |
LD111-0044-0812 | Alcoa Global Fasteners, Inc. |
LD111-0044-0812 | Lisi Aerospace Canada Corp |