NSN 5305-01-412-6625
High Torque Screw
1.063 inches fastener length, modified pan head style, between 0.568 inches and 0.601 inches head diameter, head height: between 0.162 inches and 0.183 inches .
Manufacturer part number NAS1145E11 for national stock number 5305014126625.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-412-6625.
-
MPN or Model
NAS1145E11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
1.063 inches -
Head Style
Modified pan -
Head Diameter
Between 0.568 inches and 0.601 inches -
Head Height
Between 0.162 inches and 0.183 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
Internal Drive Style
Cross recess type 1 -
End Application
Pacer dawn -
Thread Diameter
0.312 inches -
Grip Length
0.688 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Stainless steel -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205nas1145 professional/industrial association standard
More from these suppliers
- 5935-01-067-0916 MPN NAS1599REVDElectrical Plug Connector
- 5940-01-384-5279 MPN NAS1063F1-1Terminal Board Marker Strip
- 5305-00-004-5103 MPN MS21262-63Socket Head Cap Screw
- 5305-00-007-6186 MPN NAS1100C08-22Machine Screw
- 5305-00-051-6843 MPN MS27039-0822Machine Screw
- 5305-00-052-7442 MPN MS24627-3Tapping Screw
- 5305-00-054-9241 MPN MS24694C100Machine Screw
- 5305-00-071-1776 MPN MS90725-123Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-412-6625 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1145E11 | National Aerospace Standards |