NSN 5305-01-412-6671
High Torque Screw
Oversize grip dia.
Manufacturer part number LD111-0045-0818 for national stock number 5305014126671.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-412-6671.
-
MPN or Model
LD111-0045-0818
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.649 inches -
Fastener Length
Between 1.759 inches and 1.789 inches -
Head Style
Flat countersunk -
Head Diameter
0.951 inches -
Grip Diameter
Between 0.5146 inches and 0.5151 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.500 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-121-4060 MPN 84-14029-1Wing Bolting Angle
- 1560-00-130-1240 MPN 77-58522Hydraulic Line Assy
- 5945-00-643-5414 MPN 159-954063Electrical Solenoid
- 1560-00-871-1183 MPN 265-210311Aircraft Tip
- 1680-00-966-9915 MPN 6010-501Clip Assembly
- 1560-01-157-9338 MPN 140-13029-21Aircraft Structural Component Fitting
- 4920-01-158-7258 MPN 14A13000-101Aircraft Maintenance Fixture
- 4920-01-168-2571 MPN R-TBD-603Control Test Set
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-412-6671 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0045-0818 | Boeing Company, The |