NSN 5305-01-412-8686
High Torque Screw
Between 2.282 inches and 2.313 inches fastener length, flat countersunk head style, between 0.578 inches and 0.634 inches head diameter, grip diameter: between 0.3276 inches and 0.3432 inches .
Manufacturer part number 124379-5-29 for national stock number 5305014128686.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-412-8686.
-
MPN or Model
124379-5-29
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 2.282 inches and 2.313 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.578 inches and 0.634 inches -
Grip Diameter
Between 0.3276 inches and 0.3432 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.312 inches -
Grip Length
Between 2.282 inches and 2.292 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-364-9543 MPN ST3M454-3L6Close Tolerance Screw
- 5305-01-129-4432 MPN SC2671-3-11Machine Screw
- 5305-01-347-9810 MPN VCL0008-5-14PClose Tolerance Screw
- 5305-01-462-2693 MPN 3M1034C6-14-51Close Tolerance Screw
- 5306-00-680-9076 MPN GB511GF10H34Shear Bolt
- 5306-01-025-6959 MPN VAL23029-4-3Close Tolerance Bolt
- 5306-01-043-5725 MPN VAL22034-10FS21Shear Bolt
- 5306-01-129-0561 MPN VCD0004-8-22FShear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-412-8686 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
124379-5-29 | Sps Technologies, Llc |
GB510FG5-29 | Northrop Grumman Systems Corporation |
VCL0009-5-29 | Valley-todeco, Inc. |
PBF1475-5-29 | Sps Technologies, Llc |