NSN 5305-01-413-0131
High Torque Screw
Between 1.286 inches and 1.316 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: 0.188 inches .
Manufacturer part number NAS1581F3T15 for national stock number 5305014130131.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-413-0131.
-
MPN or Model
NAS1581F3T15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 1.286 inches and 1.316 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
0.188 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
F-16acft -
Thread Diameter
0.190 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, ty2cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1581 professional/industrial association standard
More from these suppliers
- 5940-01-391-1824 MPN NAS1063B26-45Terminal Board Marker Strip
- 5940-01-439-8104 MPN NAS1388-5Conductor Splice
- 5305-00-007-6183 MPN NAS1100E04-13PMachine Screw
- 5305-00-066-7323 MPN NASM24694-C63Machine Screw
- 5305-00-138-4367 MPN NAS2805-12Close Tolerance Screw
- 5305-00-140-0253 MPN NAS1351C3-20Socket Head Cap Screw
- 5305-00-145-0752 MPN NAS1101E0H38Machine Screw
- 5305-00-150-3585 MPN NAS583-94Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-413-0131 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581F3T15 | National Aerospace Standards |