NSN 5305-01-414-2151
High Torque Screw
Between 5.098 inches and 5.128 inches fastener length, pan head style, between 0.477 inches and 0.492 inches head diameter, head height: between 0.140 inches and 0.150 inches .
Manufacturer part number NAS1578A4R76 for national stock number 5305014142151.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-414-2151.
-
MPN or Model
NAS1578A4R76
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 5.098 inches and 5.128 inches -
Head Style
Pan -
Head Diameter
Between 0.477 inches and 0.492 inches -
Head Height
Between 0.140 inches and 0.150 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 4.740 inches and 4.760 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1578 professional/industrial association standard
More from these suppliers
- 1680-01-479-6212 MPN NAS355-60-910Aircraft Control Tube Assembly
- 1560-01-571-8130 MPN NAS1677D29W37NAir Retaining Strap
- 1560-01-571-8130 MPN NAS1677D29W37NAir Retaining Strap
- 5305-00-004-5326 MPN NAS720-6-4Assembled Washer Screw
- 5305-00-017-6157 MPN NAS1221-4-23Machine Screw
- 5305-00-052-5926 MPN MS35198-74Machine Screw
- 5305-00-102-3007 MPN NAS1218-3-9PMachine Screw
- 5305-00-177-5759 MPN NAS1635-06LE12Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-414-2151 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1578A4R76 | National Aerospace Standards |