NSN 5305-01-414-2181
High Torque Screw
Between 2.651 inches and 2.678 inches fastener length, flat countersunk head style, between 0.717 inches and 0.760 inches head diameter, grip diameter: between 0.4677 inches and 0.4682 inches .
Manufacturer part number 124379-7-33 for national stock number 5305014142181.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-414-2181.
-
MPN or Model
124379-7-33
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.594 inches -
Fastener Length
Between 2.651 inches and 2.678 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.717 inches and 0.760 inches -
Grip Diameter
Between 0.4677 inches and 0.4682 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.437 inches -
Grip Length
Between 2.053 inches and 2.073 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Nickel alloy 502 -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-025-6961 MPN ST3M714-4D14Close Tolerance Screw
- 5305-01-173-3599 MPN LD111-0044-2409Close Tolerance Screw
- 5305-01-501-4789 MPN 3M1170C3-6AClose Tolerance Screw
- 5306-00-116-1792 MPN 9653M27P02Shear Bolt
- 5306-00-443-6813 MPN VFK100G-05072Shear Bolt
- 5306-00-611-0404 MPN 4047T16P01Shoulder Bolt
- 5306-00-935-7528 MPN MS21250-05028Shear Bolt
- 5306-01-046-5296 MPN VAL23608-5D16Shoulder Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-414-2181 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
124379-7-33 | Sps Technologies, Llc |
GB510FG7-33 | Northrop Grumman Systems Corporation |
VCL0009-7-33 | Valley-todeco, Inc. |
GB510FG7-33 | Sps Technologies, Llc |
PBF1475-7-33 | Acuity Specialty Products, Inc |