NSN 5305-01-414-4197
Panel Screw
Altered from nsn 5305007633357,5305007254191.
Manufacturer part number 1799469-1 for national stock number 5305014144197.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-414-4197.
-
MPN or Model
1799469-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Fastener Length
Between 0.382 inches and 0.392 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.147 inches and 0.170 inches -
First Diameter From Head
Between 0.051 inches and 0.061 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
Between 0.167 inches and 0.177 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.086 inches -
Thready Qty Per Inch (tpi)
56 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Countersink Angle
82.0 degrees -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 -
Material Specification
Fed 66 federal standard all material responses -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-061-7744 MPN 534245-2Tip Jack
- 5950-00-102-8885 MPN 586056-3Radio Frequency Transformer
- 5905-00-191-1659 MPN 538265-7364Film Fixed Resistor
- 5930-00-243-4094 MPN 17664-1Lever Switch
- 5940-00-283-5280 MPN 414382-9Lug Terminal
- 5935-00-454-3014 MPN 533452-2Electrical Receptacle Connector Body
- 5905-00-468-3020 MPN 538265-7189Film Fixed Resistor
- 5905-00-503-9060 MPN 19346-2Noninductive Wire Wound Fixed Resistor
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-414-4197 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
1799469-1 | Raytheon Company |