NSN 5305-01-416-2619
High Torque Screw
Between 1.861 inches and 1.891 inches fastener length, flat countersunk head style, between 0.429 inches and 0.479 inches head diameter, grip diameter: between 0.311 inches and 0.312 inches .
Manufacturer part number C20645-5-22 for national stock number 5305014162619.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-416-2619.
-
MPN or Model
C20645-5-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.501 inches -
Fastener Length
Between 1.861 inches and 1.891 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.429 inches and 0.479 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
Point Style
Flat -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.3125 inches -
Grip Length
1.375 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
6300 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-803-8191 MPN 51B222-12HMachine Screw
- 5305-00-865-9841 MPN 3MA334CFA4-5Machine Screw
- 5305-01-004-9520 MPN AIC817-08-107CSocket Head Cap Screw
- 5305-01-025-6412 MPN AIC812-08-4Machine Screw
- 5305-01-110-9770 MPN HT4067-3-9AClose Tolerance Screw
- 5305-01-186-1231 MPN LD111-0044-2307Close Tolerance Screw
- 5305-01-412-5360 MPN LD111-0044-0815Close Tolerance Screw
- 5305-01-505-4004 MPN TX1024D3-7-7AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-416-2619 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
C20645-5-22 | Sps Technologies, Llc |
C20645-5-22 | Sps Technologies, Llc |
C20645-5-22 | Sps Technologies, Llc |
C20645-5-22 | Lockheed Martin Corporation |
AIC618-5-22 | Sps Technologies, Llc |
93926-5-22 | Sps Technologies, Llc |
93926-5-22 | Sps Technologies, Llc |
GS1009-5-22 | B & B Specialties Inc. |