NSN 5305-01-416-5247
High Torque Screw
Between 0.096 inches and 1.026 inches fastener length, flat countersunk head style, 0.266 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS8703-11 for national stock number 5305014165247.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-416-5247.
-
MPN or Model
NAS8703-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.096 inches and 1.026 inches -
Head Style
Flat countersunk -
Head Diameter
0.266 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf -
Specification Data
80205-nas8703 professional/industrial association standard
More from these suppliers
- 5935-00-478-1021 MPN NAS1650R12B10SElectrical Receptacle Connector
- 5940-01-394-5134 MPN NAS707S1Stud Terminal
- 5305-00-005-8113 MPN MS18064-46Setscrew
- 5305-00-008-9119 MPN NAS1190E04T22LSocket Head Cap Screw
- 5305-00-035-5377 MPN NAS1581A4H8TClose Tolerance Screw
- 5305-00-044-4863 MPN MS27039-4-30Machine Screw
- 5305-00-046-7439 MPN NAS1151E23Close Tolerance Screw
- 5305-00-057-0522 MPN MS51958-26Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-416-5247 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS8703-11 | National Aerospace Standards |