NSN 5305-01-417-2882
High Torque Screw
Between 0.534 inches and 0.564 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number NAS1581C3T3P for national stock number 5305014172882.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-417-2882.
-
MPN or Model
NAS1581C3T3P
-
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.377 inches and 0.387 inches -
Fastener Length
Between 0.534 inches and 0.564 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
F-16 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.177 inches and 0.197 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-393-9188 MPN NAS1063A15TB105ALTerminal Board Marker Strip
- 5935-01-443-8103 MPN NAS1692G10T5PNElectrical Receptacle Connector
- 5305-00-042-9477 MPN MS90725-91Hexagon Head Cap Screw
- 5305-00-144-9080 MPN NAS1603T19Shoulder Screw
- 5305-00-145-0776 MPN NAS1352-3LN56PSocket Head Cap Screw
- 5305-00-269-2807 MPN MS90726-64Hexagon Head Cap Screw
- 5305-00-282-0187 MPN MILS7839Machine Screw
- 5305-00-292-5542 MPN MILS7839Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-417-2882 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581C3T3P | National Aerospace Standards |
NAS1581C3T3P | National Aerospace Standards |
NAS1581C3T3P | National Aerospace Standards |
NAS1581C3T3P | National Aerospace Standards |
NAS1581C3T3P | National Aerospace Standards |
NAS1581C3T3P | National Aerospace Standards |
NAS1581C3T3P | National Aerospace Standards |
NAS1581C3T3P | National Aerospace Standards |
NAS1581C3T3P | National Aerospace Standards |
NAS1581C3T3P | National Aerospace Standards |
NAS1581C3T3P | National Aerospace Standards |