NSN 5305-01-417-3097
High Torque Screw
Between 1.344 inches and 1.391 inches fastener length, flat countersunk head style, between 0.499 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 53B334-14 for national stock number 5305014173097.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-417-3097.
-
MPN or Model
53B334-14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.485 inches -
Fastener Length
Between 1.344 inches and 1.391 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.499 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 99.5 degrees and 100.5 degrees -
Material
Steel comp 4340 or steel comp 4140 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-795-3298 MPN 3-24306-601Landing Gear Outboard Door Flap
- 1560-00-919-3862 MPN 6-50307-503Nacelle Coupling Assembly
- 1560-00-959-7725 MPN 2-10818-1Longeron Fitting
- 1680-00-986-1095 MPN 2-70286-9Inertia Lock Shoulder Harness Reel
- 1560-01-009-5204 MPN 8-13028-17Windshield Fairing Strap
- 1560-01-038-5001 MPN 3-74312-3Arm-trunnion
- 1560-01-073-2313 MPN 2-21100-510Aircraft Tip
- 5930-01-418-0207 MPN 6-50776-1Switch Actuator Adapter
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-417-3097 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
53B334-14 | Northrop Grumman Technical Services, |
53B334-14 | Northrop Grumman Systems Corporation |
53B334-14 | Northrop Grumman Systems Corporation |
53B334-14 | Northrop Grumman Systems Corporation |
53B334-14 | Northrop Grumman Technical Services, |
53B334-14 | Northrop Grumman Systems Corporation |
53B334-14 | Northrop Grumman Technical Services, |
53B334-14 | Northrop Grumman Systems Corporation |
53B334-14 | Northrop Grumman Technical Services, |
53B334-14 | Northrop Grumman Systems Corporation |
53B334-14 | Northrop Grumman Technical Services, |
53B334-14 | Northrop Grumman Systems Corporation |