NSN 5305-01-417-3815
High Torque Screw
Between 3.016 inches and 3.061 inches fastener length, flat countersunk head style, 0.337 inches head diameter, grip diameter: between 0.186 inches and 0.189 inches .
Manufacturer part number NAS517-3-42 for national stock number 5305014173815.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-417-3815.
-
MPN or Model
NAS517-3-42
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.406 inches -
Fastener Length
Between 3.016 inches and 3.061 inches -
Head Style
Flat countersunk -
Head Diameter
0.337 inches -
Grip Diameter
Between 0.186 inches and 0.189 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
2.625 inches -
Thready Qty Per Inch (tpi)
A32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Material
Steel comp 4130 -
Surface Treatment
Chromate and cadmium -
Surface Treatment Specification
Qq-p-416 type 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-323-4639 MPN MS33684-18-10PElectrical Connector Insert
- 5940-01-384-3992 MPN NAS1063A2TB107UTerminal Board Marker Strip
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5305-00-052-6895 MPN MS35198-58Machine Screw
- 5305-00-054-9242 MPN NASM24694-C101Machine Screw
- 5305-00-058-5145 MPN NAS514P440+12BMachine Screw
- 5305-00-115-9396 MPN NAS1352-06LE8PSocket Head Cap Screw
- 5305-00-136-7445 MPN NAS1081-08D2NSetscrew
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-417-3815 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS517-3-42 | National Aerospace Standards |