NSN 5305-01-417-3840
High Torque Screw
Between 0.673 inches and 0.703 inches fastener length, flat countersunk undercut head style, between 0.265 inches and 0.295 inches head diameter, head height: 0.049 inches .
Manufacturer part number HP1262D3-6-5A for national stock number 5305014173840.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-417-3840.
-
MPN or Model
HP1262D3-6-5A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.313 inches -
Fastener Length
Between 0.673 inches and 0.703 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.265 inches and 0.295 inches -
Head Height
0.049 inches -
Grip Diameter
Between 0.1885 inches and 0.1995 inches -
Single Shear Strength
125000 pounds per square inch -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-429-3473 MPN NAS1101-3-26Machine Screw
- 5305-00-505-2822 MPN LS15267V3-21Machine Screw
- 5305-00-505-3110 MPN LS15265V3-22Close Tolerance Screw
- 5305-00-725-5913 MPN AIC813-4-R19Machine Screw
- 5305-00-840-5962 MPN AIC617-1Externally Relieved Body Screw
- 5305-00-969-4747 MPN AIC1351-003Socket Head Cap Screw
- 5305-01-004-9520 MPN AIC817-08-107CSocket Head Cap Screw
- 5305-01-054-6250 MPN C9535-7-35Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-417-3840 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HP1262D3-6-5A | Heartland Precision Fasteners, Inc. |
TX1024D3-6-5A | Sps Technologies, Llc |
TX1024D3-6-5A | Sps Technologies, Llc |
TX1024D3-6-5A | Arconic Global Fasteners & Rings, |
TX1024D3-6-5A | Sps Technologies, Llc |
TX1024D3-6-5A | Sps Technologies, Llc |
TX1024D3-6-5A | Hi-shear Corporation |
TX1024D3-6-5A | Lisi Aerospace Canada Corp |
TX1024D3-6-5A | Alcoa Fastening Systems |
11853D3-6-5/1 | Reid Products Inc. |
3M1262D3-6-5A | Boeing Company, The |
10113802 | Nimikkeistokeskus Ncb Finland |
TX1024D3-6-5 | Sps Technologies, Llc |
3M1262D3-6-5 | Boeing Company, The |
TX1024D3-6-5A | Sps Technologies Inc |
3M1262D3-6-5A | B & B Specialties Inc. |