NSN 5305-01-417-3845
High Torque Screw
Between 0.736 inches and 0.766 inches fastener length, flat countersunk undercut head style, between 0.265 inches and 0.293 inches head diameter, head height: 0.049 inches .
Manufacturer part number TX1024D3-7-5A for national stock number 5305014173845.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-417-3845.
-
MPN or Model
TX1024D3-7-5A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.313 inches -
Fastener Length
Between 0.736 inches and 0.766 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.265 inches and 0.293 inches -
Head Height
0.049 inches -
Grip Diameter
Between 0.1885 inches and 0.1995 inches -
Single Shear Strength
125000 pounds per square inch -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-186-9221 MPN AIC82-4-30Close Tolerance Screw
- 5305-00-351-9122 MPN LS15266V3-3Close Tolerance Screw
- 5305-00-419-0861 MPN NAS1101-6-10WMachine Screw
- 5305-00-508-3152 MPN LS15265V4-8Close Tolerance Screw
- 5305-00-725-5918 MPN AIC813-4-R31Machine Screw
- 5305-01-004-9495 MPN AIC812-02-10Machine Screw
- 5305-01-049-4057 MPN BACB30LH4-18Close Tolerance Screw
- 5305-01-056-4220 MPN AIC986-10-52Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-417-3845 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TX1024D3-7-5A | Sps Technologies Inc |
TX1024D3-7-5A | Alcoa Fastening Systems |
HP1262D3-7-5A | Heartland Precision Fasteners, Inc. |
TX1024D3-7-5A | Sps Technologies, Llc |
TX1024D3-7-5A | Sps Technologies, Llc |
TX1024D3-7-5A | Arconic Global Fasteners & Rings, |
TX1024D3-7-5A | Sps Technologies, Llc |
TX1024D3-7-5A | Sps Technologies, Llc |
TX1024D3-7-5A | Hi-shear Corporation |
TX1024D3-7-5A | Lisi Aerospace Canada Corp |
11853D3-7-5/1 | Reid Products Inc. |
3M1262D3-7-5A | Boeing Company, The |
10113804 | Nimikkeistokeskus Ncb Finland |
TX1024D3-7-5 | Sps Technologies, Llc |
3M1262D3-7-5 | Boeing Company, The |
3M1262D3-7-5A | B & B Specialties Inc. |
Stock Check
![](/public/images/partscage_shelf3.png)