NSN 5305-01-417-4446
High Torque Screw
0.653 inches fastener length, flat countersunk head style, between 0.350 inches and 0.399 inches head diameter, grip diameter: between 0.248 inches and 0.249 inches .
Manufacturer part number NAS1581F4T4 for national stock number 5305014174446.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-417-4446.
-
MPN or Model
NAS1581F4T4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
0.653 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.350 inches and 0.399 inches -
Grip Diameter
Between 0.248 inches and 0.249 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium or chromate -
Surface Treatment Specification
Qq-p-416, ty2, cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-010-1572 MPN NAS1745-16Conductor Splice
- 5935-00-111-1891 MPN NAS1665-14Electrical Connector Backshell
- 5305-00-052-5946 MPN MS35198-4Machine Screw
- 5305-00-059-3669 MPN MS51958-73Machine Screw
- 5305-00-150-3179 MPN MS24693C342Machine Screw
- 5305-00-153-8804 MPN MS35307-320Hexagon Head Cap Screw
- 5305-00-193-1074 MPN NAS662C0-6Machine Screw
- 5305-00-225-9092 MPN MS90726-37Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-417-4446 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581F4T4 | National Aerospace Standards |
Stock Check
- NE: 28140
- NS: 628