NSN 5305-01-417-4554
High Torque Screw
Between 1.848 inches and 1.878 inches fastener length, flat countersunk undercut head style, between 0.358 inches and 0.386 inches head diameter, head height: 0.060 inches .
Manufacturer part number 3M1170D4-23 for national stock number 5305014174554.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-417-4554.
-
MPN or Model
3M1170D4-23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 1.848 inches and 1.878 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.358 inches and 0.386 inches -
Head Height
0.060 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Single Shear Strength
125000 pounds per square inch -
Internal Drive Style
Cross recess type ii -
Thread Diameter
0.250 inches -
Grip Length
Between 1.428 inches and 1.448 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp xm-13 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-817-4592 MPN NAS1101-06-6Machine Screw
- 5305-01-054-6253 MPN AIC9535-7-43Close Tolerance Screw
- 5305-01-076-4889 MPN NAS1101-08-26Machine Screw
- 5305-01-102-0312 MPN HT4068-5-16AClose Tolerance Screw
- 5305-01-134-8725 MPN AIC551C-04-179Shoulder Screw
- 5305-01-188-7465 MPN AIC4038-06-32Machine Screw
- 5305-01-188-9641 MPN HT4027-3-2Close Tolerance Screw
- 5305-01-512-8295 MPN TX1027C5-20AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-417-4554 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M1170D4-23 | Boeing Company, The |
11825D4-23 | Reid Products Inc. |
11845D4-23 | Reid Products Inc. |
TX1027D4-23 | Sps Technologies, Llc |