NSN 5305-01-418-3419
High Torque Screw
Between 0.449 inches and 0.479 inches fastener length, flat countersunk head style, between 0.246 inches and 0.280 inches head diameter, grip diameter: between 0.1359 inches and 0.1367 inches .
Manufacturer part number NAS7501-3 for national stock number 5305014183419.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-418-3419.
-
MPN or Model
NAS7501-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.449 inches and 0.479 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.246 inches and 0.280 inches -
Grip Diameter
Between 0.1359 inches and 0.1367 inches -
Internal Drive Style
Cross recess type iii -
Thread Diameter
0.138 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification all treatment responses -
Thread Series Designator
Unjf -
Specification Data
80205-nas7501 professional/industrial association standard
More from these suppliers
- 5940-01-425-6037 MPN NAS1063A5-432Terminal Board Marker Strip
- 5940-01-451-4411 MPN NAS1063A2-107ALTerminal Board Marker Strip
- 5940-01-381-7166 MPN NAS1063B204-215Terminal Board Marker Strip
- 5305-00-007-1550 MPN NAS1131E96PClose Tolerance Screw
- 5305-00-022-3124 MPN NAS1221-3-19PMachine Screw
- 5305-00-058-2069 MPN MS24677-11Socket Head Cap Screw
- 5305-00-068-7046 MPN MS24694A7Machine Screw
- 5305-00-269-4215 MPN MS24694S157Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-418-3419 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7501-3 | National Aerospace Standards |