NSN 5305-01-419-1829
High Torque Screw
Between 0.739 inches and 0.769 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number NAS1154E7P for national stock number 5305014191829.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-419-1829.
-
MPN or Model
NAS1154E7P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
Between 0.739 inches and 0.769 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Cadmium or chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification all treatment responses -
Thread Series Designator
Unjf -
Specification Data
80205-nas1154 professional/industrial association standard
More from these suppliers
- 5940-01-425-6045 MPN NAS1063A5-440Terminal Board Marker Strip
- 5940-01-381-7222 MPN NAS1063B101-120Terminal Board Marker Strip
- 5305-00-007-0217 MPN NAS1625-2Machine Screw
- 5305-00-008-7864 MPN NAS1631E2Machine Screw
- 5305-00-137-3071 MPN MS21262-60Socket Head Cap Screw
- 5305-00-174-8668 MPN NAS1352C06-22Socket Head Cap Screw
- 5305-00-206-3708 MPN NAS517-2-7Machine Screw
- 5305-00-235-0393 MPN NAS1101E02-6Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-419-1829 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1154E7P | National Aerospace Standards |