NSN 5305-01-421-1981
High Torque Screw
Between 1.513 inches and 1.543 inches fastener length, flat countersunk head style, between 0.3504 inches and 0.3988 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number NAS1581K4T18 for national stock number 5305014211981.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-421-1981.
-
MPN or Model
NAS1581K4T18
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 1.513 inches and 1.543 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.3504 inches and 0.3988 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.115 inches and 1.125 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4928 assn standard single material response or ams 4967 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1581 professional/industrial association standard
More from these suppliers
- 5905-01-174-8472 MPN RWR81S34R8FPInductive Wire Wound Fixed Resistor
- 5940-01-451-4409 MPN NAS1063A2-107AKTerminal Board Marker Strip
- 5305-00-007-1550 MPN NAS1131E96PClose Tolerance Screw
- 5305-00-082-1760 MPN MS21287-02Machine Screw
- 5305-00-140-4899 MPN NAS1352-6LN24PSocket Head Cap Screw
- 5305-00-151-6173 MPN NAS1635-01-4Machine Screw
- 5305-00-193-5240 MPN NAS1741C3R8USocket Head Cap Screw
- 5305-00-458-2832 MPN NAS1635-06-6Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-421-1981 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581K4T18 | National Aerospace Standards |
NAS1581K4T18 | National Aerospace Standards |
NAS1581K4T18 | National Aerospace Standards |
NAS1581K4T18 | National Aerospace Standards |