NSN 5305-01-421-4226
High Torque Screw
Between 1.223 inches and 1.253 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1580C3T14D for national stock number 5305014214226.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-421-4226.
-
MPN or Model
NAS1580C3T14D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 1.223 inches and 1.253 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.112 inches first hole and 1.132 inches first hole -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams576559999999999999jgaams5731 assn standard single material response or ams5732 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5940-01-451-2581 MPN NAS1063A6-510AZTerminal Board Marker Strip
- 1680-01-547-3388 MPN NAS77A12-018NPre Flanged Bushing
- 5940-01-451-4414 MPN NAS1063A20-500BBTerminal Board Marker Strip
- 5940-01-384-3975 MPN NAS1063B3-3Terminal Board Marker Strip
- 5305-00-027-5752 MPN MS21262-28Socket Head Cap Screw
- 5305-00-038-6684 MPN NAS1581F3H8TClose Tolerance Screw
- 5305-00-051-8605 MPN MS16995-77Socket Head Cap Screw
- 5305-00-052-9054 MPN MS24630-39Tapping Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-421-4226 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580C3T14D | National Aerospace Standards |
NAS1580C3T14D | National Aerospace Standards |
NAS1580C3T14D | National Aerospace Standards |
NAS1580C3T14D | National Aerospace Standards |
NAS1580C3T14D | National Aerospace Standards |
NAS1580C3T14D | National Aerospace Standards |
NAS1580C3T14D | National Aerospace Standards |
NAS1580C3T14D | National Aerospace Standards |
NAS1580C3T14D | National Aerospace Standards |
NAS1580C3T14D | National Aerospace Standards |
NAS1580C3T14D | National Aerospace Standards |
NAS1580C3T14D | National Aerospace Standards |
NAS1580C3T14D | National Aerospace Standards |