NSN 5305-01-421-4229
High Torque Screw
Between 1.388 inches and 1.418 inches fastener length, flat countersunk head style, between 0.464 inches and 0.506 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number NAS1580A4R16D for national stock number 5305014214229.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-421-4229.
-
MPN or Model
NAS1580A4R16D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 1.388 inches and 1.418 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.464 inches and 0.506 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.250 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.277 inches first hole and 1.297 inches first hole -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification single material response or mil-s-5000 military specification single material response or mil-s-6049 military specification single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5940-01-303-7067 MPN NAS1747-11Conductor Splice
- 5940-01-384-3944 MPN NAS1063A2TB107ACTerminal Board Marker Strip
- 5940-01-451-4001 MPN NAS1063A10-105BSTerminal Board Marker Strip
- 5940-01-394-5134 MPN NAS707S1Stud Terminal
- 5305-00-155-3367 MPN NAS1352-6-16Socket Head Cap Screw
- 5305-00-173-8424 MPN NAS1216-08C7Machine Screw
- 5305-00-186-9211 MPN NAS1704-26Shoulder Screw
- 5305-00-186-9546 MPN NAS1351C06H5Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-421-4229 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A4R16D | National Aerospace Standards |
NAS1580A4R16D | National Aerospace Standards |
NAS1580A4R16D | National Aerospace Standards |
NAS1580A4R16D | National Aerospace Standards |
NAS1580A4R16D | National Aerospace Standards |
NAS1580A4R16D | National Aerospace Standards |
NAS1580A4R16D | National Aerospace Standards |
NAS1580A4R16D | National Aerospace Standards |
NAS1580A4R16D | National Aerospace Standards |
NAS1580A4R16D | National Aerospace Standards |
NAS1580A4R16D | National Aerospace Standards |
NAS1580A4R16D | National Aerospace Standards |
NAS1580A4R16D | National Aerospace Standards |