NSN 5305-01-421-5091
High Torque Screw
Between 0.973 inches and 1.003 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1580C3R10DP for national stock number 5305014215091.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-421-5091.
-
MPN or Model
NAS1580C3R10DP
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 0.973 inches and 1.003 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.190 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.862 inches first hole and 0.882 inches first hole -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5732 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5940-01-425-6520 MPN NAS1063A15-327Terminal Board Marker Strip
- 5305-00-052-5696 MPN NAS1352-04H6Socket Head Cap Screw
- 5305-00-052-6893 MPN MS35198-56Machine Screw
- 5305-00-053-1117 MPN MS24621-16Tapping Screw
- 5305-00-057-0517 MPN MS51958-20Machine Screw
- 5305-00-081-9923 MPN NAS1189-3P8LSocket Head Cap Screw
- 5305-00-104-5073 MPN NAS1352-4LE40PSocket Head Cap Screw
- 5305-00-114-1977 MPN NASM27039-5-11Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-421-5091 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580C3R10DP | National Aerospace Standards |
NAS1580C3R10DP | National Aerospace Standards |