NSN 5305-01-422-3023
High Torque Screw
Between 0.970 inches and 1.030 inches fastener length, flat countersunk head style, between 0.480 inches and 0.531 inches head diameter, grip diameter: between 0.2435 inches and 0.2500 inches .
Manufacturer part number A3210117-1 for national stock number 5305014223023.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-422-3023.
-
MPN or Model
A3210117-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.839 inches and 0.964 inches -
Fastener Length
Between 0.970 inches and 1.030 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.480 inches and 0.531 inches -
Grip Diameter
Between 0.2435 inches and 0.2500 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.250 inches -
Grip Length
0.161 inches -
Width Across Flats
Between 0.156 inches and 0.159 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 84.0 degrees -
Material
Stainless steel -
Material Specification
Astma581, 300 series assn standard single material response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-013-9893 MPN SMC604309-2Electrical Connector Shell
- 5940-00-059-6766 MPN SMB432742Terminal Board
- 5935-00-129-3116 MPN SMB425575Plug-in Electronic Components Socket
- 5935-00-177-2017 MPN UPC1004MR49P1Connector Adapter
- 5935-00-189-6891 MPN 2Z8697-3Electrical Receptacle Connector
- 5985-00-238-7474 MPN SC-DL-100588TYPE-MS-118-AMast Section
- 5950-00-321-5709 MPN SCB41356Reactor
- 5935-00-644-8845 MPN 3044232ZElectrical Plug Connector
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-422-3023 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
A3210117-1 | Us Army Communications & |
A3210117-1 | Us Army Communications & |