NSN 5305-01-424-1329
High Torque Screw
Between 0.985 inches and 1.015 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 03A173-4-16 for national stock number 5305014241329.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-424-1329.
-
MPN or Model
03A173-4-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 0.985 inches and 1.015 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.565 inches and 0.585 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response or ams 5731 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-235-5775 MPN NAS1101-06H8Machine Screw
- 5305-00-252-8991 MPN AIC812-04-5Machine Screw
- 5305-00-310-5211 MPN AIC811-06-8Socket Head Cap Screw
- 5305-00-840-5962 MPN A1C617-1Externally Relieved Body Screw
- 5305-00-935-7513 MPN NAS110-00-3Machine Screw
- 5305-01-059-1909 MPN NAS1101-04-6BMachine Screw
- 5305-01-158-5368 MPN AIC944-06-6Machine Screw
- 5305-01-357-6326 MPN LE111-0033-0003Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-424-1329 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
03A173-4-16 | Northrop Grumman Systems Corporation |
03A173-4-16 | Huck International, Inc. |
03A173-4-16 | Sps Technologies, Llc |
03A173-4-16 | Arconic Global Fasteners & Rings, |
03A173-4-16 | Sps Technologies, Llc |
03A173-4-16 | Sps Technologies, Llc |
03A173-4-16 | Lfc Industries Inc. |
03A173-4-16 | Hi-shear Corporation |
03A173-4-16 | Lisi Aerospace Canada Corp |
SC3103-4-16 | Arconic Global Fasteners & Rings, |
03A173-4-16 | Northrop Grumman Systems Corporation |
03A173-4-16 | Sps Technologies, Llc |
03A173-4-16 | Arconic Global Fasteners & Rings, |
03A173-4-16 | Huck International, Inc. |
03A173-4-16 | Sps Technologies, Llc |
03A173-4-16 | Lfc Industries Inc. |
03A173-4-16 | Hi-shear Corporation |
03A173-4-16 | Sps Technologies, Llc |
03A173-4-16 | Lisi Aerospace Canada Corp |
SC3103-4-16 | Arconic Global Fasteners & Rings, |