NSN 5305-01-424-6045
High Torque Screw
Surface treatment is also dry film lube.
Manufacturer part number AIC618B3-5 for national stock number 5305014246045.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-424-6045.
-
MPN or Model
AIC618B3-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.348 inches and 0.378 inches -
Fastener Length
Between 0.660 inches and 0.690 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.188 inches and 0.189 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
F-16 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 49.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-487-5269 MPN AIC1023H4-20Close Tolerance Screw
- 5305-00-817-4592 MPN NAS1101-06-6Machine Screw
- 5305-00-913-7974 MPN NAS1101C3-14Machine Screw
- 5305-00-915-4765 MPN AIC792-3-9Machine Screw
- 5305-01-015-3313 MPN NAS1101-3-40Machine Screw
- 5305-01-041-9629 MPN BACB30LH3-7Close Tolerance Screw
- 5305-01-050-9002 MPN AIC984-7-16PClose Tolerance Screw
- 5305-01-056-4220 MPN 986-10-52Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-424-6045 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC618B3-5 | Sps Technologies, Llc |