NSN 5305-01-424-8701
High Torque Screw
Between 1.236 inches and 1.266 inches fastener length, flat countersunk head style, between 0.428 inches and 0.478 inches head diameter, grip diameter: between 0.3115 inches and 0.3120 inches .
Manufacturer part number NAS1581C5T12 for national stock number 5305014248701.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-424-8701.
-
MPN or Model
NAS1581C5T12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.501 inches -
Fastener Length
Between 1.236 inches and 1.266 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.428 inches and 0.478 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.740 inches and 0.750 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-833-5836 MPN NAS1063A2-803Terminal Board Marker Strip
- 5940-01-362-7188 MPN NAS1063B-1-2Terminal Board Marker Strip
- 5940-01-394-5134 MPN NAS707S1Stud Terminal
- 5940-01-384-3955 MPN NAS1063A20TB42CTerminal Board Marker Strip
- 5305-00-052-2234 MPN MS24667-76Socket Head Cap Screw
- 5305-00-052-6941 MPN NAS1351C3-36Socket Head Cap Screw
- 5305-00-053-1089 MPN MS35199-61Machine Screw
- 5305-00-060-7858 MPN NAS1081-08A3Setscrew
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-424-8701 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581C5T12 | National Aerospace Standards |