NSN 5305-01-425-2417
High Torque Screw
Between 2.483 inches and 2.503 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number NAS1581C3R34 for national stock number 5305014252417.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-425-2417.
-
MPN or Model
NAS1581C3R34
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 2.483 inches and 2.503 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.190 inches -
Grip Length
Between 2.115 inches and 2.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
63.0 microinches bearing surface of head -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1581 professional/industrial association standard
More from these suppliers
- 1680-01-524-1333 MPN NAS1375A04SB07Aircr Air Duct Hose
- 5305-00-052-6874 MPN MS24627-50Tapping Screw
- 5305-00-052-6919 MPN MS24629-52Tapping Screw
- 5305-00-058-9365 MPN MS51977-22Setscrew
- 5305-00-059-8229 MPN MS35214-4Machine Screw
- 5305-00-059-8515 MPN NAS1351-04-4Socket Head Cap Screw
- 5305-00-145-1015 MPN NAS1100C06-8BMachine Screw
- 5305-00-205-3919 MPN NAS1218-3E6Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-425-2417 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581C3R34 | National Aerospace Standards |
NAS1581C3R34 | National Aerospace Standards |
NAS1581C3R34 | National Aerospace Standards |
NAS1581C3R34 | National Aerospace Standards |