NSN 5305-01-426-5683
High Torque Screw
Between 1.598 inches and 1.628 inches fastener length, flat countersunk head style, 0.3047 inches head diameter, grip diameter: 0.188 inches .
Manufacturer part number NAS1581C3T20P for national stock number 5305014265683.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-426-5683.
-
MPN or Model
NAS1581C3T20P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.348 inches and 0.378 inches -
Fastener Length
Between 1.598 inches and 1.628 inches -
Head Style
Flat countersunk -
Head Diameter
0.3047 inches -
Grip Diameter
0.188 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
1.250 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
101.0 degrees -
Material
Stainless steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-396-9984 MPN NAS1063A10-TB105ATerminal Board Marker Strip
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 5305-00-003-9278 MPN NAS1221-4E42Machine Screw
- 5305-00-052-6915 MPN MS24629-44Tapping Screw
- 5305-00-151-2290 MPN NASM24693-48Machine Screw
- 5305-00-151-9785 MPN NAS1121-7Close Tolerance Screw
- 5305-00-211-3436 MPN NAS1635-3LN8Socket Head Cap Screw
- 5305-00-225-7206 MPN MS24693-BB270Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-426-5683 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581C3T20P | National Aerospace Standards |