NSN 5305-01-429-9950
High Torque Screw
Between 0.949 inches and 0.979 inches fastener length, flat countersunk head style, between 0.376 inches and 0.385 inches head diameter, grip diameter: between 0.188 inches and 0.189 inches .
Manufacturer part number NAS1153E11 for national stock number 5305014299950.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-429-9950.
-
MPN or Model
NAS1153E11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.949 inches and 0.979 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.376 inches and 0.385 inches -
Grip Diameter
Between 0.188 inches and 0.189 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
0.688 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
50 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Screw, machine-flat 100 degree head, close tolerance, short thread, offset cruciform -
Material
Stainless steel -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1153 professional/industrial association standard
More from these suppliers
- 5940-00-243-7679 MPN NAS704S2Stud Terminal
- 5935-01-421-0966 MPN NAS1834-08-550Electrical Connector Insert
- 5940-01-384-3987 MPN NAS1063A2TB107ADTerminal Board Marker Strip
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5305-00-007-1583 MPN NAS1191E3T18Socket Head Cap Screw
- 5305-00-007-6172 MPN NAS1100C00-4Machine Screw
- 5305-00-052-5950 MPN MS35198-9Machine Screw
- 5305-00-054-6869 MPN MS51031-48Setscrew
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-429-9950 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1153E11 | National Aerospace Standards |
NAS1153E11 | National Aerospace Standards |