NSN 5305-01-429-9957
High Torque Screw
Between 1.113 inches and 1.143 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.248 inches and 0.249 inches .
Manufacturer part number NAS1154E13 for national stock number 5305014299957.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-429-9957.
-
MPN or Model
NAS1154E13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
Between 1.113 inches and 1.143 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.248 inches and 0.249 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
0.812 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Screw, machine-flat 100 degree head, close tolerance, short thread, offset cruciform -
Material
Stainless steel -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1154 professional/industrial association standard
More from these suppliers
- 5940-00-872-0888 MPN NAS1745-3Conductor Splice
- 5940-01-354-9984 MPN NAS1063A20-1007Terminal Board Marker Strip
- 5940-01-510-2783 MPN NAS1063C3Terminal Board Cover
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 5940-01-384-3944 MPN NAS1063A2TB107ACTerminal Board Marker Strip
- 5305-00-007-6207 MPN NAS1393C00-3Machine Screw
- 5305-00-145-8351 MPN MS24694A3Machine Screw
- 5305-00-150-9596 MPN MILS7839Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-429-9957 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1154E13 | National Aerospace Standards |
NAS1154E13 | National Aerospace Standards |