NSN 5305-01-430-1802
High Torque Screw
Between 2.011 inches and 2.041 inches fastener length, flat countersunk head style, between 0.2083 inches and 0.2612 inches head diameter, grip diameter: between 0.1625 inches and 0.1635 inches .
Manufacturer part number NAS1992-27T for national stock number 5305014301802.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-430-1802.
-
MPN or Model
NAS1992-27T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Fastener Length
Between 2.011 inches and 2.041 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.2083 inches and 0.2612 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
Between 1.678 inches and 1.698 inches -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl2 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 5940-01-470-3343 MPN NAS1063A6-510BETerminal Board Marker Strip
- 5940-01-384-5052 MPN NAS1063A20TB42BTerminal Board Marker Strip
- 5305-00-045-3181 MPN MS24694S100Machine Screw
- 5305-00-068-7047 MPN MS24694A8Machine Screw
- 5305-00-142-3572 MPN MS21295-6Socket Head Cap Screw
- 5305-00-145-0959 MPN MS27039DD1-11Machine Screw
- 5305-00-147-8050 MPN NAS1189E04P5Socket Head Cap Screw
- 5305-00-151-5750 MPN NAS1101C06-14BMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-430-1802 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1992-27T | National Aerospace Standards |
NAS1992-27T | National Aerospace Standards |
NAS1992-27T | National Aerospace Standards |
NAS1992-27T | National Aerospace Standards |