NSN 5305-01-432-0365
High Torque Screw
Between 0.764 inches and 0.784 inches fastener length, flat countersunk head style, 0.578 inches head diameter, grip diameter: between 0.3115 inches and 0.3120 inches .
Manufacturer part number LD111-0044-0536 for national stock number 5305014320365.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-432-0365.
-
MPN or Model
LD111-0044-0536
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096630 - Screws NOI Brass/bronze/copper -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.482 inches and 0.542 inches -
Fastener Length
Between 0.764 inches and 0.784 inches -
Head Style
Flat countersunk -
Head Diameter
0.578 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
B1b -
Thread Diameter
0.312 inches -
Grip Length
0.500 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Q-p-35 federal specification 13th treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-125-2373 MPN 66-33578Landin Rod Assembly
- 1560-00-328-8490 MPN 88-54828Battery S Tube Assy
- 4920-01-155-2063 MPN 46A89000-001Test Program Set
- 1560-01-166-1267 MPN L2100104-002Aircraft Tip
- 1560-01-172-4412 MPN L3004800-001Aircraft Structural Component Support
- 4920-01-176-9096 MPN R-TBD-826Valve Inlet Test Adapter
- 1560-01-192-7581 MPN L5351652-002Aircraft Fluid Manifold
- 5935-01-201-6460 MPN ES27484T8F35PElectrical Plug Connector
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-432-0365 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-0536 | Boeing Company, The |
LD111-0044-0536 | Boeing Company, The |
LD111-0044-0536 | Boeing Company, The |
LD111-0044-0536 | Boeing Company, The |
LD111-0044-0536 | Boeing Company, The |
LD111-0044-0536 | Boeing Company, The |
LD111-0044-0536 | Boeing Company, The |