NSN 5305-01-432-6743
High Torque Screw
Between 6.863 inches and 6.878 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number AIC985-3-104P for national stock number 5305014326743.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-432-6743.
-
MPN or Model
AIC985-3-104P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 6.863 inches and 6.878 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 6.490 inches and 6.510 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Minimum Yield Strength
132000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-049-5664 MPN BACB30LH3-6Close Tolerance Screw
- 5305-01-322-8717 MPN 720210-90Hexagon Head Cap Screw
- 5305-01-338-1316 MPN BACS12GU3K25Machine Screw
- 5305-01-381-1835 MPN AIC818-3-209CSocket Head Cap Screw
- 5305-01-381-1927 MPN AIC818-4-309CSocket Head Cap Screw
- 5305-01-396-5208 MPN AIC618-3-6Close Tolerance Screw
- 5305-01-449-1909 MPN AIC985-4-6RShoulder Screw
- 5306-00-357-1727 MPN AIC753-3-3Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-432-6743 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC985-3-104P | Sps Technologies, Llc |
H185-3-104 | Huck International, Inc. |
C7985-3-104 | Lockheed Martin Corporation |
VT1694F3-104 | Arconic Global Fasteners & Rings, |
121558-3-104P | Sps Technologies, Llc |
VT1694F3-104 | Alcoa Global Fasteners, Inc. |
H185-3-104 | Huck Intl Inc |