NSN 5305-01-433-1007
High Torque Screw
Between 0.949 inches and 0.979 inches fastener length, flat countersunk head style, between 0.338 inches and 0.381 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number HT4049-3-11 for national stock number 5305014331007.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-433-1007.
-
MPN or Model
HT4049-3-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.949 inches and 0.979 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.338 inches and 0.381 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-177-5896 MPN LD111-0044-2406Close Tolerance Screw
- 5305-01-386-1474 MPN VCL0009-3-6Machine Screw
- 5305-01-435-8525 MPN BACB30LU9-46Close Tolerance Screw
- 5305-01-486-5594 MPN J951P07AMachine Screw
- 5306-00-240-3208 MPN BACB30LJ6DU14Close Tolerance Bolt
- 5306-00-409-3290 MPN BACB30LJ6DU20Close Tolerance Bolt
- 5306-00-925-9697 MPN VFK100G-05016Shear Bolt
- 5306-01-005-6105 MPN J644P16AMachine Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-433-1007 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT4049-3-11 | Arconic Global Fasteners & Rings, |
HT4049-3-11 | Huck International, Inc. |
ST3M714-3-11 | Fastener Innovation Technology, Inc. |
WC4049-3-11 | West Coast Aerospace Inc |
HT4049-3-11 | Sps Technologies, Llc |
HT4049-3-11 | Hi-shear Corporation |
HT4049-3-11 | Lisi Aerospace Canada Corp |
HT4049-3-11 | Sps Technologies, Llc |
ST3M714-3-11 | Valley-todeco, Inc. |
ST3M714-3-11 | Heartland Precision Fasteners, Inc. |
ST3M714-3-11 | Houston Precision Fasteners I, Lp |
HT4049-3-11 | Sps Technologies, Llc |
HT4049-3-11 | Sps Technologies, Llc |
11931-3-11 | Reid Products Inc. |
HT4049-3-11 | Sps Technologies Ltd Tj Brooks |
ST3M714-3-11 | Boeing Company, The |
HT4049-3-11 | Huck Intl Inc |
HT4049-3-11 | Alcoa Global Fasteners, Inc. |