NSN 5305-01-434-3298
High Torque Screw
Between 1.204 inches and 1.234 inches fastener length, flat countersunk undercut head style, between 0.629 inches and 0.634 inches head diameter, head height: 0.490 inches .
Manufacturer part number 3M925C5-11A for national stock number 5305014343298.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-434-3298.
-
MPN or Model
3M925C5-11A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.531 inches -
Fastener Length
Between 1.204 inches and 1.234 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.629 inches and 0.634 inches -
Head Height
0.490 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Features Provided
O ring -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp xm-13 -
Surface Treatment
Aluminum -
Surface Treatment Specification
Mil-c-83488, type 2, class 3 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-406-3085 MPN 11907-6DL14Close Tolerance Screw
- 5305-01-439-4807 MPN 3M1170C3-3AFClose Tolerance Screw
- 5305-01-514-0440 MPN 11929-4-15-1Close Tolerance Screw
- 5306-00-541-9490 MPN 11825-6D19Close Tolerance Bolt
- 5306-01-367-9816 MPN 11697A05U052Shear Bolt
- 5306-01-425-1108 MPN 11831-5H58Machine Bolt
- 5320-00-278-0799 MPN TL330L4-15Pin-rivet
- 5320-00-833-8812 MPN TLV901-4-3Pin-rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-434-3298 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M925C5-11A | Boeing Company, The |
11881C5-11A | Reid Products Inc. |